Freight that arrives leaning, crushed or with torn wrap usually needs a restack before it can be stored or reloaded. Nexus Warehouse does this work at 99 Kero Rd in Carlstadt, New Jersey, 15 miles from Port Newark, as part of pallet storage in Carlstadt and pallet restacking and rework. Current rates are on the pricing page. To get a container restacked, stored and released, call 877-456-4113. Nexus Warehouse holds a 4.8-star rating across 103 Google reviews (October 2026).
What a restack actually is
A restack means the freight comes off the pallet it arrived on and goes back onto a pallet built to a usable spec. Crew breaks the shrink wrap, pulls cartons down, sorts them, and rebuilds to the height, weight and pattern the receiver wants — usually on a standard GMA footprint, 48 x 40 inches in the US. Then it gets rewrapped, corner-boarded if the stack needs it, relabeled and staged for outbound.
It is not a cosmetic step. Ocean freight moving through the Port of New York and New Jersey — 8.89 million TEUs in 2025, the second-busiest US gateway — spends weeks at sea and days on a chassis. Wrap loosens, cartons settle, and a pallet that was square in Ningbo is leaning by the time it hits a New Jersey dock. Most retail and marketplace DCs will refuse it in that condition, and a refused delivery costs far more than the rework.
When a load needs a restack
Six situations account for nearly every restack we handle:
- Leaning or collapsed pallets. Wrap failed in transit, the stack shifted, and the load will not pass a receiving inspection.
- Damaged base pallets. Broken stringers, cracked deck boards, protruding nails, or wet and stained wood. The freight is fine; the wood underneath it is not.
- Over-height or overhanging loads. The receiver caps pallet height, or cartons hang past the 48 x 40 footprint and will not fit a rack bay or a trailer row.
- Mixed-SKU pallets. A rainbow pallet has to be sorted into single-SKU pallets before a DC or an FBA facility will take it.
- Floor-loaded containers. Nothing to restack, technically — the cartons arrive loose and have to be palletized from scratch during transloading.
- Overweight trailers. Weight has to be redistributed across pallets so the outbound trailer sits legal on its axles.
Not sure which one applies? Send photos from the drayman before the box leaves the terminal. One look usually tells whether a load needs a full rebuild or just a rewrap.
How it is billed
Handling is priced per standard pallet, in and out. That is the part you can budget before the container is even on the water. After the first 2 free hours, storage is billed by the day or by the month, and a restack per pallet rebuilt. Storage is billed on the pallet count after the restack, which is why that count matters.
In numbers: $10 per pallet in and $10 out, so 20 pallets in and out cost $400 in handling. The first 2 hours on arrival are free; after that storage is $4 per pallet per day, or from $59 per pallet per month. A restack is from $85 per pallet.
Whatever the rate, the count it applies to can change once a container is broken down — 18 leaning pallets in often means 22 clean ones out. Handling rates are on the pricing page.
Storage by the hour vs. monthly warehousing
These are two different products, and importers mix them up constantly.
Short-dwell storage exists to protect your per diem and chassis clock. You are not warehousing anything — you are getting the box stripped, the freight restacked, and the empty back to the terminal before demurrage starts. The first 2 hours on arrival are free for exactly this reason, and if the freight goes straight back out the same day, the job is closer to cross-docking than storage. A container pulled from Port Newark in the morning can usually be stripped, rebuilt and tendered to an outbound carrier the same day.
Monthly warehousing is the opposite: freight sits for weeks while you release it in waves to a DC, a marketplace, or final-mile customers. It is billed by the month, from $59 per pallet, on the pallet count after the restack. Say how long the freight will sit when you book.
The test: freight with a delivery appointment this week needs short-dwell handling. Inventory held against future orders needs a storage quote.
This article is one part of a wider picture. For the full sequence — what happens to a container after discharge at Port Newark, what every handling step costs at published rates, and which clock is running against you at each stage — see Importing Through Port Newark: the complete warehouse and 3PL guide.
Common questions
How far is Nexus Warehouse from Port Newark?
Nexus Warehouse is at 99 Kero Rd, Carlstadt, NJ 07072 — about 15 miles from Port Newark. That is a short drayage run, which keeps the container turn tight and the per diem clock short.
How is pallet storage with restack billed?
Handling is $10 per standard pallet in and $10 per standard pallet out, and the first 2 hours of storage on arrival are free. After that, storage is $4 per pallet per day or from $59 per pallet per month, and a restack is from $85 per pallet rebuilt. Call 877-456-4113 or use the contact page for a quote on your specific load.
Can a container be restacked and shipped out the same day?
Often, yes. A box pulled in the morning can usually be stripped, restacked and tendered outbound before end of day. Our hours: Open 24/7. Walk-in 8 AM–5 PM, first come first served. After 5 PM and weekends — by appointment, manager’s confirmation required, extra fees apply. After-hours fees are based on the actual time the service is performed, not the driver’s arrival time. Same-day turns depend on pallet count and how much sorting the load needs, so confirm the timing when you book.